Click To Enlarge
| |
| The IQ plus 710 is an economical solution to automated process control. Whether your application requires adding multiple ingredients to a batch, turning on a motor, or starting a conveyor, the IQ plus 710 can execute a variety of complex tasks. The IQ plus 710 is available in both flat and sloped-face enclosure styles.
|
|
Standard Features:
- Stainless steel NEMA 4X/IP66 washdown enclosure
- Large 0.75” (19 mm) Vacuum Fluorescent Display (VFD) with 16 characters for operator prompting
- Selectable analog to digital measurement rate
- 5-point linearization calibration
- 4 macros, 30 steps each, ability to interconnect macros with setpoints (macro can start batch setpoints)
- 8 digital inputs plus 8 digital outputs
- 60 16-character programmable fields for display prompts
- Power for eight 350 ohm load cells or sixteen 700 ohm load cells
- Expanded 29-key alphanumeric keyboard
- Full alphanumeric keyboard for entering truck ID, numbering, prompts, and more
- 300-ID truck in/out programs (six modes), 7 characters
- Batching and continuous mode setpoint functions
- Programmable consecutive numbering
- Two communication ports: (1) EDP port, full duplex RS-232 or RS-485, (1) printer port, simplex RS-232 or 20 mA
- Operate, configure, and calibrate via 2 interfaces: front panel (keyboard & display) or EDP serial command port (RS-232, RS-485)
- Six 300-character programmable output formats, independent transmission to EPD or printer port
- 300-character alphanumeric “title block” for custom printouts
- Completely menu driven
- Angled/sloped keypad for user comfort
- Time and date
- Accumulator
-
-
|
|
|
