
- Select options
- Add to WishlistAdd to Wishlist
BB200 Ag Indicator – All Versions (NTEP)
Our brand new BB200 Indicator is a farmers friend! It comes with your choice of LED or backlit LCD display, as well as important ag-only functions like Animal Hold, Configurable automatic zeroing (so the indicator doesn’t zero when you turn it on and have 725 pounds of feed left in the hopper), and much more.
- Select options
- Add to WishlistAdd to Wishlist


- Select options
- Add to WishlistAdd to Wishlist
LP-7510, Mild Steel, with A/C and Rechargeable Battery (NTEP)
Our best-selling LP-7510 Indicator includes your choice of LED or backlit LCD display. This version also includes a rechargeable battery. FEATURES ● 1” LED or LCD display with backlight ● Gross/Tare/Pre-Set Tare/Zero ● Multiple Hold functions ● Count weighing ● Accumulation weighing ● Overload / Underload alarm ● Power saving mode ● Automatic date and
- Select options
- Add to WishlistAdd to Wishlist


- Select options
- Add to WishlistAdd to Wishlist
10,000lb COMPONENT SCALE KIT
Our 10,000lb Scale Kit is the best scale kit to use for Truck and Trailer-mounted Cake Feeders, Grain Carts, etc. The kit consists of FOUR 5,000lb Large Envelope Load Cells. This means that each corner of your truck-mounted feeder can withstand up to 5,000lbs of bouncing as you drive through the pasture. Please specify if
- Select options
- Add to WishlistAdd to Wishlist


- Select options
- Add to WishlistAdd to Wishlist
BB200 Keypad Overlay w/buttons
This is a replacement keypad and button overlay for those worn out buttons on your indicator. With years of repeated use, it is not uncommon for the electrical contacts in the a button key to go bad. Generally it’s the Power Button or the Zero Key. Regardless, this is the replacement. IMPORTANT: Select LED (orange/red
- Select options
- Add to WishlistAdd to Wishlist

- Add to cart
- Add to WishlistAdd to Wishlist
BB200 Replacement Battery
This is the replacement battery for all models of the BB200 Indicator. Note that the brand may differ from the image shown above but the specs will be identical.
- Add to cart
- Add to WishlistAdd to Wishlist

- Add to cart
- Add to WishlistAdd to Wishlist
Extreme Duty Weighbars
We’ve been custom-building our own weighbars for almost 10 years now, and we’ve learned quite a bit about what makes a set of weighbars last. First of all, this is something we have to do together. You have to tell us exactly what size bars to build so they’re not too short and don’t reach, and they’re not too long so you don’t trip over them and kill yourself when you’re walking around the chute. And, when you install this scale, you have to agree to run a little bit of conduit.
- Add to cart
- Add to WishlistAdd to Wishlist

- Add to cart
- Add to WishlistAdd to Wishlist
LP-7510 / OP-900 Replacement Battery
This is the replacement battery for all models of the OP-900, LP-7510, BB-7510 and similar indicators. Note that the brand may differ from the image shown above but the specs will be identical.
- Add to cart
- Add to WishlistAdd to Wishlist

- Add to cart
- Add to WishlistAdd to Wishlist
Replacement A/C Adapter – Single Pin
This is the replacement adapter for the BB200, OP-900, LP-7510, BB-7510, BB-8100SS, and similar indicators.
- Add to cart
- Add to WishlistAdd to Wishlist


- Add to cart
- Add to WishlistAdd to Wishlist
Replacement Home Run Cable (OP-410) 4-Pin to Pigtail
FEATURES ● Replacement cables for indicators, scales and scoreboards This is the replacement interface cable for some platform scales and floor scales from Prime Scales and other Chinese manufacturers. The cable goes from the indicator to the junction box. This cable has a 4-pin connector at one end and bare wire at the other. 20
- Add to cart
- Add to WishlistAdd to Wishlist


- Add to cart
- Add to WishlistAdd to Wishlist
Replacement Home Run Cable (OP-410) 5-Pin to 5-Pin
FEATURES ● Replacement cables for indicators, scales and scoreboards This is the standard replacement interface cable for some Optima and Tufner Floor Scales, as well as floor scales from other manufacturers. The cable goes from the indicator to the plug on the side of the floor scale. This cable has a 5-pin connector at both
- Add to cart
- Add to WishlistAdd to Wishlist