Locosc Precision Engineering

Locosc Precision Engineering

LP-7510, Mild Steel, with A/C and Rechargeable Battery (NTEP)
$299.00

Our best-selling LP-7510 Indicator includes your choice of LED or backlit LCD display. This version also includes a rechargeable battery. FEATURES ● 1” LED or LCD display with backlight ● Gross/Tare/Pre-Set Tare/Zero ● Multiple Hold functions ● Count weighing ● Accumulation weighing ● Overload / Underload alarm ● Power saving mode ● Automatic date and

Compare
Add to Wishlist
Add to Wishlist
10,000lb COMPONENT SCALE KIT
$675.00$1,120.00

Our 10,000lb Scale Kit is the best scale kit to use for Truck and Trailer-mounted Cake Feeders, Grain Carts, etc. The kit consists of FOUR 5,000lb Large Envelope Load Cells. This means that each corner of your truck-mounted feeder can withstand up to 5,000lbs of bouncing as you drive through the pasture. Please specify if

Compare
Add to Wishlist
Add to Wishlist
LP-7510 / OP-900 Replacement Battery
$28.00

This is the replacement battery for all models of the OP-900, LP-7510, BB-7510 and similar indicators. Note that the brand may differ from the image shown above but the specs will be identical.

Compare
Add to Wishlist
Add to Wishlist
LP-7510 Washdown / Stainless Steel – A/C Power
$390.00

SPECIFICATIONS Display: LCD or LED; 1in. x 6 digit numeric Units: lb, kg (primary), oz, g (LCD only) Accuracy Class: 5,000 e Resolution: 120,000 dd industrial; 10,000 dd HB44 Excitation Voltage: 5V DC Largest Output Current: 120 mA Excitation Circuit: 5 VCD, 4 wire connections Load Cell: 6 load cells of 350 Ω maximum Load Cell Excitation: 5 ± 0.5VDC Display Resolution: 30,000; ADC: 2,000,000 Zero Stability Error: TKspn < ± 6 ppm//K Sensitivity (internal): 0.3 µV/d Input Voltage: -30 to +30mV DC Power: 100~240VAC @ 50/60Hz Power Consumption: 5W @9VDC Operating Temperature: 14°F to 104°F ≤ 90%RH Weight: 4.3 lbs (1.95 kgs) Internal Resolution: 24 bit A/D Sigma-Delta; 1,048,000 d Display Increments: Selectable 1, 2, 5, 10, 20, 50 Decimal Points: Selectable 0, 1, 2, 3, 4 decimal places Conversion Rate: 12 samples/second typical Analog Signal Input Range: 1mV/V to 3mV/V Analog Signal Sensitivity: 0.1 uV/graduation (min) Measurement Rate: 0 ~ 15mV Auto Zero Tracking: 0 - 5 dd increments Auto Zero Delay: 0 - 3 second increments Motion Detect: 1 - 10 dd Motion Delay: 0 - 55 dd

Compare
Add to Wishlist
Add to Wishlist
LP-7620 / OP-916SS STAINLESS STEEL FLOOR SCALES – Diamond Plate Top
$2,060.00$3,540.00

FEATURES ● Rugged smooth or diamond deck safety tread plate stainless steel deck ● 304 or 316 stainless steel (316L also available) ● Channel construction for superior strength ● Four NTEP certified hermetically sealed IP69K stainless steel load cells ● Four adjustable stainless steel support feet ● Side access to junction box ● Capacity is

Compare
Add to Wishlist
Add to Wishlist
LP-7620 / OP-916SS STAINLESS STEEL FLOOR SCALES – Smooth Top
$1,620.00$2,730.00

FEATURES ● Rugged smooth or diamond deck safety tread plate stainless steel deck ● 304 or 316 stainless steel (316L also available) ● Channel construction for superior strength ● Four NTEP certified hermetically sealed IP69K stainless steel load cells ● Four adjustable stainless steel support feet ● Side access to junction box ● Capacity is

Compare
Add to Wishlist
Add to Wishlist
LP-7629SSLT / OP-916-SSLT QUICK CLEAN LIFT TOP STAINLESS STEEL FLOOR SCALE
$2,200.00$3,560.00

FEATURES ● Rugged smooth or diamond deck safety tread plate stainless steel deck ● Hydraulic manual top lifting for easy washdown ● Rigid 304 or 316 stainless steel frame and top plate (316L also available) ● NEMA 4X watertight stainless steel junction box ● Side access to junction box ● Four NTEP certified hermetically sealed

Compare
Add to Wishlist
Add to Wishlist
LP-7650 PORTABLE BENCH SCALES STAINLESS STEEL WASHDOWN (INC. INDICATOR AND COLUMN)
$700.00$850.00

FEATURES ● Convenient portable weighing platform with wheels ● Easily moves in any work area ● 27.5” backrail for pushing or pulling ● Swivel wheel casters come with brakes in the back ● High accuracy stainless steel load cells ● Hinged indicator bracket ● IP Rating: Standard- IP65, Stainless Steel- IP67 ● Legal for Trade:

Compare
Add to Wishlist
Add to Wishlist
LP-7650SS STAINLESS STEEL BENCH SCALES HIGH PRECISION1 (INC. INDICATOR AND COLUMN)
$890.00

FEATURES ● Stainless steel base, stainless steel platform ● Large 0.9” backlit LCD indicator with a rechargeable battery ● Stainless steel load cell with hardwired cable to indicator for maximum water protection ● Detachable column and tilt stand for table, wall or under counter mounting ● Overload stops on scale base ● Measurement units: lb,

Compare
Add to Wishlist
Add to Wishlist
Replacement A/C Adapter – Single Pin
$32.00

This is the replacement adapter for the BB200, OP-900, LP-7510, BB-7510, BB-8100SS, and similar indicators.

Compare
Add to Wishlist
Add to Wishlist
Replacement A/C Adapter – Three-Pin (Washdown)
$58.00

This is the replacement adapter for the Stainless Steel washdown version of the OP-900, LP-7510, BB-7510 and similar indicators.

Compare
Add to Wishlist
Add to Wishlist
Replacement Home Run Cable (OP-410) 3-Pin to 3-Pin
$85.00

FEATURES ● Replacement cables for indicators, scales and scoreboards This is a replacement interface cable for remote displays and similar peripheral devices. This cable has female 3-pin connectors at both ends. 20 feet. Waterproof.

Compare
Add to Wishlist
Add to Wishlist
Replacement Home Run Cable (OP-410) 4-Pin to Pigtail
$48.00

FEATURES ● Replacement cables for indicators, scales and scoreboards This is the replacement interface cable for some platform scales and floor scales from Prime Scales and other Chinese manufacturers. The cable goes from the indicator to the junction box. This cable has a 4-pin connector at one end and bare wire at the other. 20

Compare
Add to Wishlist
Add to Wishlist
Replacement Home Run Cable (OP-410) 5-Pin to 3-Pin
$85.00

FEATURES ● Replacement cables for indicators, scales and scoreboards This is a replacement interface cable for remote displays and similar peripheral devices. This cable has a female 5-pin connectors at one end and a female 3-pin connector at the other. 20 feet. Waterproof.

Compare
Add to Wishlist
Add to Wishlist
Replacement Home Run Cable (OP-410) 5-Pin to 5-Pin
$48.00

FEATURES ● Replacement cables for indicators, scales and scoreboards This is the standard replacement interface cable for some Optima and Tufner Floor Scales, as well as floor scales from other manufacturers. The cable goes from the indicator to the plug on the side of the floor scale. This cable has a 5-pin connector at both

Compare
Add to Wishlist
Add to Wishlist
Replacement Home Run Cable (OP-410) 5-Pin to OP-928 Vehicle Scale
$48.00

FEATURES ● Replacement cables for indicators, scales and scoreboards This is a replacement interface cable for OP-928 Vehicle Scale. The cable goes from the indicator to the scale. This cable has a 5-pin connector at one end and a proprietary adapter for the OP-928 at the other. 20 feet. Waterproof.

Compare
Add to Wishlist
Add to Wishlist
© 2023 All Rights Reserved By B&B Scales. Designed By Website Design Company FODUU.