

- Select options
- Add to WishlistAdd to Wishlist
LP7611 Mild Steel Heavy Duty Bench Scale (All Sizes & Capacities)
● Mild steel platform, 304 stainless steel tray for easy cleaning
● Adjustable tilt display for convenient viewing
● Aluminum environmentally sealed single point load cell
● Adjustable feet provides exceptional traction
● Standard removable column and wall mounting option
● OP-900 NTEP indicator with 6 digit, 1” display
● Check-weighing feature for quick portioning
● Built-in RS-232 communication port
● Level bubble
- Select options
- Add to WishlistAdd to Wishlist


- Select options
- Add to WishlistAdd to Wishlist
LP7611SS Stainless Steel Heavy Duty Bench Scale (All Sizes & Capacities)
● Mild steel platform, 304 stainless steel tray for easy cleaning
● Adjustable tilt display for convenient viewing
● Aluminum environmentally sealed single point load cell
● Adjustable feet provides exceptional traction
● Standard removable column and wall mounting option
● OP-900 NTEP indicator with 6 digit, 1” display
● Check-weighing feature for quick portioning
● Built-in RS-232 communication port
● Level bubble
- Select options
- Add to WishlistAdd to Wishlist


- Select options
- Add to WishlistAdd to Wishlist
10,000lb COMPONENT SCALE KIT
Our 10,000lb Scale Kit is the best scale kit to use for Truck and Trailer-mounted Cake Feeders, Grain Carts, etc. The kit consists of FOUR 5,000lb Large Envelope Load Cells. This means that each corner of your truck-mounted feeder can withstand up to 5,000lbs of bouncing as you drive through the pasture. Please specify if
- Select options
- Add to WishlistAdd to Wishlist


- Select options
- Add to WishlistAdd to Wishlist
5,000lb Component Scale Kit
Our 5,000lb Scale Kit is an excellent choice for small Grain Carts, feed wagons, etc, and it is an excellent way to rebuild your aging floor scales! This should be your first choice if you’re building your own animal platform, vet scale or similar platform scale. The kit consists of FOUR 2,500lb Single-Ended Shear Beam
- Select options
- Add to WishlistAdd to Wishlist

- Add to cart
- Add to WishlistAdd to Wishlist
LP-7510 / OP-900 Replacement Battery
This is the replacement battery for all models of the OP-900, LP-7510, BB-7510 and similar indicators. Note that the brand may differ from the image shown above but the specs will be identical.
- Add to cart
- Add to WishlistAdd to Wishlist

- Select options
- Add to WishlistAdd to Wishlist
LP-7650 PORTABLE BENCH SCALES
FEATURES ● Convenient portable weighing platform with wheels ● Easily moves in any work area ● 27.5” backrail for pushing or pulling ● Swivel wheel casters come with brakes in the back ● High accuracy stainless steel load cells ● Hinged indicator bracket ● IP Rating: Standard- IP65, Stainless Steel- IP67 ● Legal for Trade:
- Select options
- Add to WishlistAdd to Wishlist

- Select options
- Add to WishlistAdd to Wishlist
LP-7650 Standard Bench Scale (Includes Indicator and Column) (NTEP)
● Mild steel platform, 304 stainless steel tray for easy cleaning ● Adjustable tilt display for convenient viewing ● Aluminum environmentally sealed single point load cell ● Adjustable feet provides exceptional traction ● Standard removable column and wall mounting option ● LP-7510 NTEP indicator with 6 digit, 1” display ● Check-weighing feature for quick portioning ● Built-in RS-232 communication port ● Level bubble
- Select options
- Add to WishlistAdd to Wishlist

- Select options
- Add to WishlistAdd to Wishlist
LP-7650SS STAINLESS STEEL BENCH SCALES
FEATURES ● Stainless steel base, stainless steel platform ● Large 0.9” backlit LCD indicator with a rechargeable battery ● Stainless steel load cell with hardwired cable to indicator for maximum water protection ● Detachable column and tilt stand for table, wall or under counter mounting ● Overload stops on scale base ● Measurement units: lb,
- Select options
- Add to WishlistAdd to Wishlist

- Select options
- Add to WishlistAdd to Wishlist
OP-900 / LP-7510 Replacement Motherboard (PCB)
This is a replacement motherboard for all models of the OP-900, LP-7510, BB-7510 and similar indicators. This is a much less expensive alternative to replacing the entire indicator should your A/D card go out or should the indicator otherwise fail. Please select between the LCD version (black, back-lit numbers) or the LED version (bright red/orange
- Select options
- Add to WishlistAdd to Wishlist


- Select options
- Add to WishlistAdd to Wishlist
OP-900 Mild Steel, A/C Adapter (NTEP)
Our best selling indicator! This version is perfect for indoor or outdoor installations where power or a power inverter is present. FEATURES ● 1” LED or LCD display with backlight ● Gross/Tare/Pre-Set Tare/Zero ● Multiple Hold functions ● Count weighing ● Accumulation weighing ● Overload / Underload alarm ● Power saving mode ● Automatic date
- Select options
- Add to WishlistAdd to Wishlist

- Add to cart
- Add to WishlistAdd to Wishlist
Replacement A/C Adapter – Single Pin
This is the replacement adapter for the BB200, OP-900, LP-7510, BB-7510, BB-8100SS, and similar indicators.
- Add to cart
- Add to WishlistAdd to Wishlist

- Add to cart
- Add to WishlistAdd to Wishlist
Replacement A/C Adapter – Three-Pin (Washdown)
This is the replacement adapter for the Stainless Steel washdown version of the OP-900, LP-7510, BB-7510 and similar indicators.
- Add to cart
- Add to WishlistAdd to Wishlist


- Read more
- Add to WishlistAdd to Wishlist
Replacement Home Run Cable (OP-410) 3-Pin to 3-Pin
FEATURES ● Replacement cables for indicators, scales and scoreboards This is a replacement interface cable for remote displays and similar peripheral devices. This cable has female 3-pin connectors at both ends. 20 feet. Waterproof.
- Read more
- Add to WishlistAdd to Wishlist


- Add to cart
- Add to WishlistAdd to Wishlist
Replacement Home Run Cable (OP-410) 4-Pin to 4-Pin
FEATURES ● Replacement cables for indicators, scales and scoreboards This is the replacement interface cable for some platform scales and floor scales from Prime Scales and other Chinese manufacturers. The cable goes from the indicator to the side of the platform or scale base. This cable has a 4-pin connector at both ends. 20 feet.
- Add to cart
- Add to WishlistAdd to Wishlist


- Add to cart
- Add to WishlistAdd to Wishlist
Replacement Home Run Cable (OP-410) 4-Pin to Pigtail
FEATURES ● Replacement cables for indicators, scales and scoreboards This is the replacement interface cable for some platform scales and floor scales from Prime Scales and other Chinese manufacturers. The cable goes from the indicator to the junction box. This cable has a 4-pin connector at one end and bare wire at the other. 20
- Add to cart
- Add to WishlistAdd to Wishlist


- Add to cart
- Add to WishlistAdd to Wishlist
Replacement Home Run Cable (OP-410) 5-Pin to 3-Pin
FEATURES ● Replacement cables for indicators, scales and scoreboards This is a replacement interface cable for remote displays and similar peripheral devices. This cable has a female 5-pin connectors at one end and a female 3-pin connector at the other. 20 feet. Waterproof.
- Add to cart
- Add to WishlistAdd to Wishlist