- Select options
- Add to WishlistAdd to Wishlist
BB-200 Replacement Motherboard (PCB)
This is a replacement motherboard for all models of the BB-200 Indicator. This is a much less expensive alternative to replacing the entire indicator should your A/D card go out or should the indicator otherwise fail. Please select between the LCD version (black, back-lit numbers) or the LED version (bright red/orange numbers). The LCD and
- Select options
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
BB200 Keypad Overlay w/buttons
This is a replacement keypad and button overlay for those worn out buttons on your indicator. With years of repeated use, it is not uncommon for the electrical contacts in the a button key to go bad. Generally it’s the Power Button or the Zero Key. Regardless, this is the replacement. IMPORTANT: Select LED (orange/red
- Select options
- Add to WishlistAdd to Wishlist
- Add to cart
- Add to WishlistAdd to Wishlist
BB200 Replacement Battery
This is the replacement battery for all models of the BB200 Indicator. Note that the brand may differ from the image shown above but the specs will be identical.
- Add to cart
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
LP-7510 / OP-900 Keypad Overlay w/buttons
This is a replacement keypad and button overlay for those worn out buttons on your indicator. With years of repeated use, it is not uncommon for the electrical contacts in the a button key to go bad. Generally it’s the Power Button or the Zero Key. Regardless, this is the replacement. This keypad will say
- Select options
- Add to WishlistAdd to Wishlist
- Add to cart
- Add to WishlistAdd to Wishlist
LP-7510 / OP-900 Replacement Battery
This is the replacement battery for all models of the OP-900, LP-7510, BB-7510 and similar indicators. Note that the brand may differ from the image shown above but the specs will be identical.
- Add to cart
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
OP-412 THERMAL TICKET TABLE TOP PRINTER
FEATURES ● Easy to load fast processing thermal line printer ● Paper type: Thermal paper roll, 58mm ● Paper width: 58±0.5mm,ø≤50mm ● Effective print width: 48mm ● TPH lifetime: 50km ● Printing font: (ANK) 5×7 ; 6×8 ASCII ● Paper end sensor: yes ● Printing speed: 65mm/s ● Resolution: 203dpi, 384 dots per line ●
- Select options
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
OP-412-L1 THERMAL TICKET PRINTER
FEATURES ● Easy to load thermal printer ● Paper clamps prevent jams ● Can use thermal roll paper, thermal label paper, and adhesive thermal paper ● Fast processing ● Print width: 80mm ● Paper diameter: 85mm max, 25mm min ● Dimensions: 5.6” (W) x 8.5” (L) x 5.5” (H) ● Interface: Usb + serial port
- Select options
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
OP-412-L2 THERMAL TICKET/BARCODE PRINTER
FEATURES ● Direct thermal 4” x 6” label printer ● 203 dpi high resolution ● 2-8 inch/s high-speed printing ● 120mm paper exit chute ● Paper width Max. 118mm (4.64”) Min. 20mm (0.78”) ● Support two-dimensional barcode printing (QRCODE) ● Three switchable pressures of print head ● Single-motor gear driven design and merged sensor design
- Select options
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
OP-425 CABLE ROLLS
FEATURES ● Interface cable in a roll of 330ft long
- Select options
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
OP-900 / LP-7510 Indicator Rebuild Kit
Do you have an old LP-7510 indicator lying in the junk pile? Did your OP-900 get soaked or struck by lightning? This series of indicators has been for sale in the US for over a decade, and our kit has all the parts in it that you’ll need to completely rebuild it, from the ground
- Select options
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
OP-900 / LP-7510 Replacement Motherboard (PCB)
This is a replacement motherboard for all models of the OP-900, LP-7510, BB-7510 and similar indicators. This is a much less expensive alternative to replacing the entire indicator should your A/D card go out or should the indicator otherwise fail. Please select between the LCD version (black, back-lit numbers) or the LED version (bright red/orange
- Select options
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
OP-900-LD REMOTE DISPLAY (SCOREBOARD)
FEATURES ● Remote display and indicator built in one ● Bright 3” LED display ● Gross/Tare/Zero ● Units: kg, lb ● Accumulation weighing ● Power saving mode ● Mild steel enclosure with wall mount bracket ● Upper glare shield ● Connects through RS232 port ● Comes with Remote with antenna, perfect for wall mounting ●
- Select options
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
OP-910 REMOTE DISPLAYS (SCOREBOARDS)
FEATURES ● Bright LED segment display ● Easy to see in almost any environment ● Easy to install, connects with RS232 port ● Indoor use only
- Select options
- Add to WishlistAdd to Wishlist
- Select options
- Add to WishlistAdd to Wishlist
OP-910X REMOTE DISPLAYS (SCOREBOARDS)
FEATURES ● Easy to see in almost any environment ● Great for use with vehicle scales, so drivers can see weight while inside their vehicle ● Easy to install, connects with RS232 port ● Appropriate for outdoor use ● OP-910X Lights Green when weight is stable and Red when unstable
- Select options
- Add to WishlistAdd to Wishlist
- Add to cart
- Add to WishlistAdd to Wishlist
Replacement A/C Adapter – Single Pin
This is the replacement adapter for the BB200, OP-900, LP-7510, BB-7510, BB-8100SS, and similar indicators.
- Add to cart
- Add to WishlistAdd to Wishlist
- Add to cart
- Add to WishlistAdd to Wishlist
Replacement A/C Adapter – Single Pin
This is the replacement adapter for the BB200, OP-900, LP-7510, BB-7510, BB-8100SS, and similar indicators.
- Add to cart
- Add to WishlistAdd to Wishlist