Category: Indicators & Controllers

FEATURES ● Stainless Steel construction ● Provides protection for your OP-900 Indicator ● Can be mounted with hooks or nails ● Latch on side for use with a lock ● Can only be used with OP-900 indicators without batteries

SPECIFICATIONS Display: LED; 0.4in x 6 digit numeric Units: lb, kg, t Power: 220VAC Operating Temperature: 14°F to 104°F ≤ 90%RH Weight: 1.2 lbs (1.95 kgs)

SPECIFICATIONS Display: LCD or LED; 2 in. x 6 digit numeric Units: lb, kg Accuracy Class: 3,000 e Stimulating Voltage: +3.3 VDC A/D converting speed: 10 SPS Load signal range: 0~12.8mV Excitation Circuit: +3.3 VDC, 4 wire connections Load Cell: 4 load cells of 350 Ω maximum Sensitivity (internal): 0.3 µV/d Input Voltage: -30 to +30mV DC Power: AC 100-250V Battery: 4V/4Ah; 110/220VAC Operating Temperature: 14°F to 104°F ≤ 90%RH Weight: 4.3 lbs (1.95 kgs) Internal: 1/2/5/10/20/50 Display Increments: Selectable 1, 2, 5, 10, 20, 50 Decimal Points: Selectable 0, 1, 2, 3, 4 decimal places Interface: RS232C Baud Rate: 1200/2400/4800/9600

Standard Features • LED display, 0.8in (20.3mm) six-digit, seven-segment • Configurable analog to digital measurement rate • Power for four 350ohm load cells • Primary/secondary units configuration: lb, kg, ounces, grams • Five-button operation • Two independent communication ports: (1) full duplex, (1) unidirectional or active 20mA current loop • Standardized EDP command sets •

Specifications Power: 120/120 Plus: Line voltages: 115 or 230VAC Frequency: 50 or 60Hz 120 Plus: (estimated battery life) 60 hours with 1 x 350Ω, 40 hours with 4 x 350Ω Charge time eight hours Excitation Voltage: 5 VDC, 4 x 350Ω or 8 x 700Ω load cells Analog Signal Input Range: -0.6mV/V - 3.0mV/V Analog Signal Sensitivity: 0.3 μV/graduation minimum, 1.5 μV/grad recommended A/D Sample Rate: 120: 3 to 30Hz, software selectable 120 Plus: 30Hz Resolution: Internal: 1 million internal graduations Display: 10,000 displayed graduations System Linearity / PI Rating: Within 0.01% of full scale Circuit Protection: RFI, EMI, ESD protected Load Cell Connection: Cord grip entry Detachable plug (optional) Serial Output: EDP port: Full duplex RS-232 Printer port: Output-only RS-232 or active 20mA current loop Both ports: 9600, 4800, 2400, 1200, 600, 300bps; Seven or eight data bits; even, odd or no parity Status Annunciators: 120/120 Plus: Center of zero, stand still, gross, net, lb, kg, oz, g 120 Plus: Battery, setpoint 1 and 2, Hold Display: 120: 0.8 in (20mm), six-digit red light emitting diode (LED) display, seven-segment digits 120 Plus: 0.8 in (20mm) six-digit LCD with backlight, seven-segment digits Keys/Buttons: 120: Five-key flat membrane panel, tactile feel 120 Plus: Zero, tare, preset tare, hold, gross/net, units, numeric 0-9, clear, enter/print (Optional) Digital I/O: 120 Plus: Requires option card 24 volt source Three digital inputs Two digital outputs Temperature Range Certified: 14°F to 104°F (-10°C to 40°C) Operating: 14°F to 122°F (-10°C to 50°C) Rating/Material: Enclosure: heavy gauge ABS Weight: 2.6 lb (1.2 kg) Warranty: One-year limited warranty Approvals: NTEP CC 03-059, Class III/IIIL 10,000d Measurement Canada AM-5517, Class III/IIIHD 10,000d EU Test Certificate TC7028 (120) Class III, 10,000d EU Test Certificate TC7626 (120 Plus) Class III, 10,000d CE marked