Specifications Power: 120/120 Plus: Line voltages: 115 or 230VAC Frequency: 50 or 60Hz 120 Plus: (estimated battery life) 60 hours with 1 x 350Ω, 40 hours with 4 x 350Ω Charge time eight hours Excitation Voltage: 5 VDC, 4 x 350Ω or 8 x 700Ω load cells Analog Signal Input Range: -0.6mV/V - 3.0mV/V Analog Signal Sensitivity: 0.3 μV/graduation minimum, 1.5 μV/grad recommended A/D Sample Rate: 120: 3 to 30Hz, software selectable 120 Plus: 30Hz Resolution: Internal: 1 million internal graduations Display: 10,000 displayed graduations System Linearity / PI Rating: Within 0.01% of full scale Circuit Protection: RFI, EMI, ESD protected Load Cell Connection: Cord grip entry Detachable plug (optional) Serial Output: EDP port: Full duplex RS-232 Printer port: Output-only RS-232 or active 20mA current loop Both ports: 9600, 4800, 2400, 1200, 600, 300bps; Seven or eight data bits; even, odd or no parity Status Annunciators: 120/120 Plus: Center of zero, stand still, gross, net, lb, kg, oz, g 120 Plus: Battery, setpoint 1 and 2, Hold Display: 120: 0.8 in (20mm), six-digit red light emitting diode (LED) display, seven-segment digits 120 Plus: 0.8 in (20mm) six-digit LCD with backlight, seven-segment digits Keys/Buttons: 120: Five-key flat membrane panel, tactile feel 120 Plus: Zero, tare, preset tare, hold, gross/net, units, numeric 0-9, clear, enter/print (Optional) Digital I/O: 120 Plus: Requires option card 24 volt source Three digital inputs Two digital outputs Temperature Range Certified: 14°F to 104°F (-10°C to 40°C) Operating: 14°F to 122°F (-10°C to 50°C) Rating/Material: Enclosure: heavy gauge ABS Weight: 2.6 lb (1.2 kg) Warranty: One-year limited warranty Approvals: NTEP CC 03-059, Class III/IIIL 10,000d Measurement Canada AM-5517, Class III/IIIHD 10,000d EU Test Certificate TC7028 (120) Class III, 10,000d EU Test Certificate TC7626 (120 Plus) Class III, 10,000d CE marked

SPECIFICATIONS Display: LED; 0.8 in. x 6 digit numeric Units: lb, kg Accuracy Class: 5,000 e Resolution: 30,000 ; ADC: 2,000,000 Excitation Voltage: 5V DC 4 wire connection Excitation Circuit: 5 VCD, 4 wire connections Load Cell: 12 load cells of 350 Ω maximum Load Cell Excitation: 5 ± 0.5VDC Zero Stability Error: TK0 < 0.1μV//K Span Stability Error: TKspn < ± 6 ppm//K Sensitivity (internal): 0.3 µV/d Input Voltage: -30 to +30mV DC Power: 100~240VAC @ 50/60Hz AC Power: AC 110V Battery: 6V4Ah Operating Temperature: 32°F to 104°F ≤ 85%RH Weight: 7.9 lbs Display Increments: Selectable 1, 2, 5, 10, 20, 50 Decimal Points: Selectable 0, 1, 2, 3, 4 decimal places

Specifications: Power: Line voltages: 100-240 VAC Frequency: 50-60 Hz DC voltages: n/a Power Consumption: 8 W Excitation Voltage: 5 VDC, 8 x 350Ω or 16 x 700Ω load cells Analog Signal Input Range: ±7 mV/V Analog Signal Sensitivity: 0.1 uV/graduation minimum 0.5 uV/graduation recommended A/D Sample Rate: 5, 10, 20, 40 Hz, software selectable Resolution: Internal: 523,000 counts Display: 100,000 graduations System Linearity / PI Rating: Within 0.01% of full scale Digital I/O: Optional 2 or 4 inputs 4 or 8 dry-contact relays Communication Ports: Com 1: RS-232 full duplex Com 2: RS-232 full duplex or 20 mA simplex, continuous Both ports 1200, 2400, 4800, 9600, 19200, 38400 baud seven or eight data bits, even, odd or no parity (Optional) Analog Output: 16-bit resolution, voltage output 0-10 VDC, current output 0-20 mA / 4-20 mA (Optional) Relay Board: Two opto-isolated, 5 to 24 VDC, active high inputs. Two inputs (requires relay output option). Primary keys, pseudo functions, batching functions. (4) 30 VDC, 2 amp dry-contract relays (Optional) Ethernet and USB Board: USB five-pin header for PC, printer or flash drive. Ethernet TCP/IP, RJ45 jack, server and client ports. Display: LED display, 0.8 in (20 mm), six-digit, seven-segment Status Annunciators: Gross, net, center of zero, stand still, lb, kg, tare, preset tare Keys/Buttons: Flat membrane panel, embossed keys, tactile feel Temperature Range Certified: 14°F to 104°F (-10°C to 40°C) Operating: 14°F to 122°F (-10°C to 50°C) Weight: 6.4 lb (2.9 kg) Rating/Material: Enclosure: NEMA Type 4X/IP66, heavy-gauge stainless steel Warranty: Two-year limited warranty EMC Immunity: EN 50082 Part 2 IEC EN 61000-4-2, 3, 4, 5, 6, 8, and 11 Approvals: Measurement Canada AM-5892, Accuracy Class III/IIIHD, 10,000d NTEP CC 12-123, Accuracy Class III/IIIL, 10,000d OIML R76/2006-NL1-12.48, EU Test Certificate TC8322 Accuracy Class III, 10,000d CE Marked UL/cUL Listed

Our best-selling LP-7510 Indicator includes your choice of LED or backlit LCD display. This version also includes a rechargeable battery. FEATURES ● 1” LED or LCD display with backlight ● Gross/Tare/Pre-Set Tare/Zero ● Multiple Hold functions ● Count weighing ● Accumulation weighing ● Overload / Underload alarm ● Power saving mode ● Automatic date and