FEATURES
● Remote display and indicator built in one
● Bright 3” LED display
● Gross/Tare/Zero
● Units: kg, lb
● Accumulation weighing
● Power saving mode
● Mild steel enclosure with wall mount bracket
● Upper glare shield
● Connects through RS232 port
● Comes with Remote with antenna, perfect for wall mounting
● NTEP approved with up to 1/30,000 display resolution
● Indoor use only
| size | OP-900-LD 3” 23” (L) x 5” (W) x 9” (H) LED Segment 8 lbs |
|---|
SPECIFICATIONS
Display:
LCD or LED; 1in. x 6 digit numeric
Units:
lb, kg (primary), oz, g (LCD only)
Accuracy Class:
5,000 e
Resolution:
120,000 dd industrial; 10,000 dd
HB44
Excitation Voltage:
5V DC
Largest Output Current:
120 mA
Excitation Circuit:
5 VCD, 4 wire connections
Load Cell:
6 load cells of 350 Ω maximum
Load Cell Excitation:
5 ± 0.5VDC
Display Resolution:
30,000; ADC: 2,000,000
Zero Stability Error:
TKspn < ± 6 ppm//K
Sensitivity (internal):
0.3 µV/d
Input Voltage:
-30 to +30mV DC
Power:
100~240VAC @ 50/60Hz
Power Consumption:
5W @9VDC
Operating Temperature:
14°F to 104°F ≤ 90%RH
Weight:
4.3 lbs (1.95 kgs)
Internal Resolution:
24 bit A/D Sigma-Delta; 1,048,000
d
Display Increments:
Selectable 1, 2, 5, 10, 20, 50
Decimal Points:
Selectable 0, 1, 2, 3, 4 decimal
places
Conversion Rate:
12 samples/second typical
Analog Signal Input Range:
1mV/V to 3mV/V
Analog Signal Sensitivity:
0.1 uV/graduation (min)
Measurement Rate:
0 ~ 15mV
Auto Zero Tracking:
0 – 5 dd increments
Auto Zero Delay:
0 – 3 second increments
Motion Detect:
1 – 10 dd
Motion Delay:
0 – 55 dd
Specifications
Power:
120/120 Plus:
Line voltages: 115 or 230VAC
Frequency: 50 or 60Hz
120 Plus: (estimated battery life)
60 hours with 1 x 350Ω, 40 hours with 4 x 350Ω
Charge time eight hours
Excitation Voltage:
5 VDC, 4 x 350Ω or 8 x 700Ω load cells
Analog Signal Input Range:
-0.6mV/V – 3.0mV/V
Analog Signal Sensitivity:
0.3 μV/graduation minimum,
1.5 μV/grad recommended
A/D Sample Rate:
120: 3 to 30Hz, software selectable
120 Plus: 30Hz
Resolution:
Internal: 1 million internal graduations
Display: 10,000 displayed graduations
System Linearity / PI Rating:
Within 0.01% of full scale
Circuit Protection:
RFI, EMI, ESD protected
Load Cell Connection:
Cord grip entry
Detachable plug (optional)
Serial Output:
EDP port: Full duplex RS-232
Printer port: Output-only RS-232 or active 20mA
current loop
Both ports: 9600, 4800, 2400, 1200, 600, 300bps;
Seven or eight data bits; even, odd or no parity
Status Annunciators:
120/120 Plus: Center of zero, stand still, gross, net,
lb, kg, oz, g
120 Plus: Battery, setpoint 1 and 2, Hold
Display:
120: 0.8 in (20mm), six-digit red light emitting diode
(LED) display, seven-segment digits
120 Plus: 0.8 in (20mm) six-digit LCD with backlight,
seven-segment digits
Keys/Buttons:
120: Five-key flat membrane panel, tactile feel
120 Plus: Zero, tare, preset tare, hold, gross/net, units,
numeric 0-9, clear, enter/print
(Optional) Digital I/O:
120 Plus: Requires option card
24 volt source
Three digital inputs
Two digital outputs
Temperature Range
Certified: 14°F to 104°F (-10°C to 40°C)
Operating: 14°F to 122°F (-10°C to 50°C)
Rating/Material:
Enclosure: heavy gauge ABS
Weight:
2.6 lb (1.2 kg)
Warranty:
One-year limited warranty
Approvals:
NTEP CC 03-059, Class III/IIIL 10,000d
Measurement Canada AM-5517,
Class III/IIIHD 10,000d
EU Test Certificate TC7028 (120) Class III, 10,000d
EU Test Certificate TC7626 (120 Plus) Class III,
10,000d
CE marked
Specifications:
Power:
Line voltages: 100-240 VAC
Frequency: 50-60 Hz
DC voltages: n/a
Power consumption: 8 W
Excitation Voltage:
5 VDC, 8 x 350Ω or 16 x 700Ω load cells
Analog Signal Input Range:
±7 mV/V
Analog Signal Sensitivity:
0.1 μV/graduation minimum,
0.5 μV/graduation recommended
A/D Sample Rate:
5, 10, 20, 40 Hz, software selectable
Resolution:
Internal: 523,000 counts
Display: 100,000 graduations
System Linearity / PI Rating:
Within 0.01% of full scale
Digital I/O:
RFI capacitor bypass and ESD suppressors
Communication Ports:
Com 1: RS-232 full duplex
Com 2: RS-232 full duplex or 20 mA simplex,
continuous
Both ports 1200, 2400, 4800, 9600, 19200, 38400
baud seven or eight data bits, even, odd or no parity
(Optional) Analog Output:
16-bit resolution, voltage output 0-10 VDC, current
output 0-20 mA / 4-20 mA
(Optional) Relay Board:
Two opto-isolated, 5 to 24 VDC, active high inputs.
Two inputs (requires relay output option). Primary
keys, pseudo functions, batching functions.
(4) 30 VDC, 2 amp dry-contract relays
(Optional) Ethernet and USB Board:
USB five-pin header for PC, printer or flash drive.
Ethernet TCP/IP, RJ45 jack, server and client ports.
Display:
LCD backlit display, 0.8 in (20 mm), six-digit,
seven-segment
Transmissive/Transflective
Status Annunciators:
Gross, net, center of zero, standstill, lb, kg, tare,
preset tare
Keys/Buttons:
Flat membrane panel, embossed keys, tactile feel
Temperature Range
Certified: 14°F to 104°F (-10°C to 40°C)
Operating: 14°F to 122°F (-10°C to 50°C)
Weight:
6.4 lb (2.9 kg)
Rating/Material:
Enclosure: NEMA Type 4X/IP66, heavy-gauge
stainless steel
Warranty:
Two-year limited warranty
EMC Immunity:
EN 50082 Part 2 IEC EN 61000-4-2, 3, 4,
5, 6, 8, and 11
Approvals:
NTEP CC 12-123, Class III/IIIL, 10 000d
Measurement Canada AM-5892, Class III/IIIHD,
10,000d
OIML R76/2006-NL1-12.48
EU Test Certificate TC8322
CE Marked
UL/cUL Listed
